SureCall Flare 3.0 Signal Booster

Save 27%
$412.49 USD
$299.99 USD

Improve your cell signal for all Canadian carriers inside any home, cottage, small building or office up to 3,000 square feet. Flare 3.0® takes the multi-award winning SureCall Flare model one step further to deliver even more cellular reliability to homes in remote areas.

Flare 3.0 comes kitted with a Yagi-directional antenna and an average 9 dB increase in uplink power for the frequencies that are most commonly used in rural areas. Together, the increased uplink and upgraded antenna pack the Flare 3.0 with 8X more connecting power for homes and offices in the most challenging signal locations.

  • Improves cell service for all Canadian carrier’s voice, text and 4G LTE data signals

  • Increases signal strength & extends battery life for multiple users on all cellular devices, up to 3,000 sq ft

  • Significantly improved uplink power and high-gain Yagi antenna for best performance in the toughest environments without sacrificing performance in urban locations

  • Newly added gain expands indoor cell coverage for those located at the edge of the network

  • Simple to set up with all components included for a light DIY install

  • Industry best 3-year warranty and lifetime US-based tech support

HOW IT WORKS

Flare 3.0 has combined the booster and indoor antenna to streamline the system's design for easier installation and an attractive, low-profile appearance. The stylish one-piece base unit is designed to be placed on an open tabletop or shelf for clearer and more reliable voice and data performance.

Signal is delivered to the Flare 3.0 booster with the included outdoor Yagi antenna and 50 feet of premium RG-6 cable. The outdoor antenna captures signal from the cell tower and the all-carrier booster amplifies it and distributes the enhanced signal to all mobile devices within the booster’s coverage area. Flare 3.0 then amplifies outgoing signal back to the cell tower.

KIT CONTENTS

Flare 3.0 indoor booster, high-gain Yagi antenna with mounting hardware, RG-6 cable (50 ft), AC power supply, quick setup guide

Product Specifications
Uplink Frequency Range (MHz): 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included)
Downlink Frequency Range (MHz): 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included)
Donor/Server Port Impedance: 75 Ohm / 50 Ohm
Maximum Gain: 72 dB
Noise Figure: 7 dB
VSWR: ≤2.0
Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G LTE and all cellular standards
AC Input: Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3A
Maximum Output Power: 1 Watt EIRP
Cable: RG-6 (50 ft)
RF Connector: F-Female
Power Consumption: <12W
Weight: 1.81 lb
Dimensions: 5.125" × 7.25" × 5.625"

 

You recently viewed

Clear recently viewed